3mm LED

https://cyberconnect.shop/shop/product/3mm-led-2062

R 1.15 1.1500000000000001 ZAR

R 0.00

This combination does not exist.

Add to Cart



3mm round through-hole LED, sold per piece. Choose red, white, yellow, green or blue. Suits compact indicators and breadboard projects with a series resistor.


Deliveries:
    South Africa: Price: R115, 2-4 working days.
    International: Contact us for a quote.
Collections:  No Charge

A 3 mm round through-hole LED in red, white, yellow, green or blue. Its small body fits tightly spaced panels, breadboards and compact enclosures where a 5 mm LED is too large. Sold per piece. Choose the colour from the options.

Specifications

Package3 mm round, through-hole, two leads
ColoursRed, white, yellow, green and blue, chosen from the options
PolarityThe longer lead is the anode (+). The flat edge on the rim and the shorter lead mark the cathode (−).
Typical operating currentAbout 20 mA, or less for a dimmer indicator
Absolute maximum currentAbout 20–30 mA continuous, depending on the maker and colour. Run it lower, not at the limit.
Sold asPer piece

Typical forward voltage by colour

ColourTypical forward voltage (VF)Typical test current
Red1.8–2.4 V20 mA
Yellow1.8–2.4 V20 mA
Green2.0–2.5 V (higher on some makers’ bright green types)20 mA
Blue2.8–3.6 V20 mA
White2.8–3.6 V20 mA

Typical uses

  • Compact power, status and activity indicators on projects, panels and enclosures
  • Learning circuits on a breadboard, Arduino, ESP32 and Raspberry Pi projects
  • School and hobby electronics kits
  • Replacing a failed small indicator LED in equipment
  • Simple signalling, such as a mains-on or battery-low light

Using a series resistor

An LED must always have a resistor in series, or it will draw too much current and burn out. Work out the value as R = (supply voltage − LED voltage) ÷ current. For example, from a 5 V supply at 20 mA, a red LED at about 2 V needs about 150 Ω, and a blue or white LED at about 3.2 V needs about 100 Ω. A higher value gives a dimmer light and a longer life, and 330 Ω to 1 kΩ is a safe, clearly visible choice for most 5 V projects. Connect the anode (longer lead) towards the positive side.

Notes. Figures are typical and vary between makers and colours, so use them as a guide when choosing a resistor. Blue and white LEDs need a supply above about 3.6 V to light properly, so they will not work from a single 3 V coin cell.

Colour

White , Yellow , Red , Green , Blue