5mm Clear Round LED
5mm round LED with a clear (transparent) lens, sold per piece. Choose red, white, yellow, green or blue. Suits bright, focused indicators and breadboard projects with a series resistor.
Deliveries:
South Africa: Price: R115, 2-4 working days.
International: Contact us for a quote.
Collections: No Charge
A 5 mm round LED with a clear (water-clear) lens, in red, white, yellow, green or blue. The lens is transparent, so the colour comes from the chip and shows when the LED is lit. A clear lens typically gives a brighter, more focused beam than a diffused lens, which suits torches, signal lights and projects where you want the light pointed at something. Sold per piece. Choose the colour from the options.
Specifications
| Package | 5 mm (T-1 3/4) round, through-hole, two leads |
|---|---|
| Lens | Clear (water-clear, transparent) lens, which typically gives a brighter, narrower beam than a diffused lens |
| Colours | Red, white, yellow, green and blue, chosen from the options. The colour shows when the LED is lit. |
| Polarity | The longer lead is the anode (+). The flat edge on the rim and the shorter lead mark the cathode (−). |
| Typical operating current | About 20 mA |
| Absolute maximum current | About 25–30 mA continuous, depending on the maker and colour. Run it lower, not at the limit. |
| Sold as | Per piece |
Typical forward voltage by colour
| Colour | Typical forward voltage (VF) | Typical test current |
|---|---|---|
| Red | 1.8–2.4 V | 20 mA |
| Yellow | 1.8–2.4 V | 20 mA |
| Green | 2.0–2.5 V (higher on some makers’ bright green types) | 20 mA |
| Blue | 2.8–3.6 V | 20 mA |
| White | 2.8–3.6 V | 20 mA |
Typical uses
- Torches, bicycle lights and signal lights where a bright, focused beam helps
- Power, status and activity indicators on projects, panels and enclosures
- Learning circuits on a breadboard, Arduino, ESP32 and Raspberry Pi projects
- School and hobby electronics kits
- Light pipes, optical sensing and other uses that need a clear lens
Using a series resistor
An LED must always have a resistor in series, or it will draw too much current and burn out. Work out the value as R = (supply voltage − LED voltage) ÷ current. For example, from a 5 V supply at 20 mA, a red LED at about 2 V needs about 150 Ω, and a blue or white LED at about 3.2 V needs about 100 Ω. A higher value gives a dimmer light and a longer life, and 330 Ω to 1 kΩ is a safe, clearly visible choice for most 5 V projects. Connect the anode (longer lead) towards the positive side.
Notes. Figures are typical and vary between makers and colours, so use them as a guide when choosing a resistor. Blue and white LEDs need a supply above about 3.6 V to light properly, so they will not work from a single 3 V coin cell.
Photos: Nevit Dilmen, CC BY-SA 3.0 (main image, cropped and background edited), and oomlout, CC BY-SA 2.0 (lit example, a tinted-lens LED, cropped and background edited), both via Wikimedia Commons.
|
Colour |
White , Yellow , Red , Green , Blue |