ODROID H2+

The oDroid Intel Gemini Lake-H2+ is a wonderful option to use for your ready to go projects,  Now with faster CPU and 2.5GbE Ethernet ports! This board runs both Ubuntu 18:10 and Windows operating systems and is the world’s most popular open-spec, community backed, hacker board.

Additional components required for a complete solution:

• RAM SO-DIMM DDR4
  

• Sata cables for power

• Sata cables for data

• Power supply 15V/4A
  

• Case (optional)
  

• eMMC (optional)
  

• Case (one of)

• • Type 1

  • Type 2

  • Type 3

  • Type 4
    

Please note that the board comes without RAM or eMMC card.

Key Features:

• Intel Quad-core processor J4115 (14nm) with 4MiB Cache, up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread))

• Dual-channel Memory DDR4-PC19200 (2400MT/s)

• Total 32GiB RAM Space with two SO-DIMM slots

• 4 x PCIe 2.0 for    1 X M.2 NVMe storage

• 2 x 2.5Gbit Ethernet ports

• 2 x SATA 3.0

• SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)

• Intel UHD Graphics 600 (Gen9.5 LP GT1) up to 700Mhz

• HDMI 2.0 and DP 1.2 multiple 4K/60Hz video outputs

• RTC / BIOS backup battery is included
  

Specifications:

Form Factor
    • Dimensions: 110mm x 110mm x 47mm
    • Weight: 285 g including heatsink

Processor
    • CPU (Intel Celeron J4115 Processor)   
    • Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi-Thread)
    • 4MB L2 Cache
    • UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz)
    • Fan-less design

Memory
    • 2 x DDR4 1.2V SO-DIMM slots
    • Dual Channel, up to 2400 MT/s (DDR4-PC19200)
    • Max memory capacity 32GB
        ◦ DDR3 is not supported

Storage   

    • 1 x eMMC connector (bootable and selectable on BIOS)
        ◦ Various eMMC modules can be purchased at Hardkernel store
    • 2 x SATA3 6Gbps
    • 1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards)
        ◦ M.2 SATA SSD is not supported

Networking
    • 2 x 2.5 GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
    • Realtek RTL8111G
    • Supports Wake-On-Lan
    • LED indicators (Green: Link, Amber: Traffic)

Video
    • 1 x DisplayPort 1.2 (up to 4K@60Hz)
    • 1 x HDMI 2.0 (up to 4K@60Hz)
    • Dual simultaneous display support

Audio
    • 1 x Audio out (3.5mm jack)
    • 1 x Audio in (3.5mm jack)
    • 1 x SPDIF out (ALC662, HDA codec)

External I/O
    • 2 x USB 3.0 Host ports
    • 2 x USB 2.0 Host ports
    • 1 x Peripheral Expansion Header (20-pin, 2.54mm pitch)
        ◦ 1 x DC 5V, 1 x DC 3.3V, 5 x GND
        ◦ 2 x UART (TXD/RXD/RTS/CTS)
        ◦ 2 x I2C (SCL/SDA)
        ◦ 1 x External Power Button
        ◦ All 3.3V I/O signal level

Other features
    • Passive Heatsink
    • BIOS Backup Battery
        ◦  Maintains system time and BIOS settings
    • Power Button
    • Reset Button
    • System LEDS Indicators:
        ◦  Red (PWR) – Solid light when DC power is supplied
        ◦  Blue (left, ALIVE) – Solid light when System is running
        ◦  Blue (right, RESET) – When the RESET button is pressed
        ◦  Amber (SATA) – Flashes when there is data transfer
        ◦  Green (NVMe) – Flashes when there is data transfer
    • Active Cooling Fan Connector (5V 4-pin, PWM input + TACHO output)
        ◦ Active Cooling Fan is optional
        ◦ Connector (4-pin, 1.25mm pitch)
Power
    • 1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
    • DC 14V ~ 20V (up to 60W)
        ◦ DC 15V/4A power adaptor is recommended

    • Power consumption:
        ◦  IDLE : ≃4W
        ◦  CPU Stress : ≃14W
        ◦  CPU+GPU Stress : ≃22W
        ◦  Power-off : ≃0.5W
        ◦  Suspend : ≃0.6W