3,856.32 3856.32 ZAR


Add to Cart

South Africa: Price: R115, 2-4 working days.
International: Contact us for a quote.
No Charge - 3 Appian Place, 373 Kent Ave, RandburgEffortlessly bridge legacy and modern technologies with our DB9 to USB Connector, enabling seamless connectivity between serial devices and USB ports.

All items subject to 1 month warranty. Extended 12 month warranty available at 20% of purchase price. t&c apply

oDroid H3

oDroid H3 Small Board Computer

A brand new x86 64-bit single board computer with large memory capacity and advanced IO ports has now been released, introducing the new oDroid H3, the more powerful H3 offers greater performance and is more powerful than its predecessor the H2+.


  • Intel® Quad-Core Processor Jasper Lake N5105 has a base clock of 2GHz and a boost clock of 2.9GHz with 1.5 MB L2 and 4 MB L3 cache by a 10 nm process.

  • Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)

  • Two SO-DIMM slots, up to 32GB per slot

  • PCIe 3.0 x 4 lanes for one M.2 NVMe storage

  • 2 x 2.5Gbit Ethernet ports

  • 2 x SATA 3.0 ports

  • SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)

  • Intel UHD Graphics 24 EUs Turbo 800MHz(H3+:900MHz)

  • HDMI 2.0 and DP 1.2 multiple video outputs

  • A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode.

  • RTC / BIOS backup battery is included

Board Detail

  • CPU (Intel Celeron N5105)

  • 2 x DDR4 SO-DIMM slots (Dual channel memory support)

  • 1 x M.2 PCI Express Module Socket (NGFF-2280)

  • 1 x eMMC (Embedded Multimedia-Card) Socket

  • 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)

  • 2 x SATA3 6.0 Gb/s Data Connectors

  • 1 x DC Power Jack

  • 2 x USB 3.0

  • 2 x USB 2.0

  • 1 x HDMI 2.0

  • 1 x DisplayPort 1.2

  • 2 x RJ45 Ethernet Ports (10/100/1000/2500)

  • 5 x System LED Indicators

  • 1 x Peripheral Expansion Header (24-pin)

  • 1 x Power Switch

  • 1 x Reset Switch

  • 1 x Backup Battery Connector (2-pin)

  • 1 x Active Cooling Fan Connector (4-pin)

  • 1 x Audio out, 1 x Audio in, 1 x SPDIF out

You may also need:


The power consumption and heat dissipation on the oDroid C4 board is relatively low thanks to the modern 12mm fabricated S905X3 CPU.


intel Celeron N5105(H3+: N6005) Processor (10nm, Quad-Core, TDP 10W)

H3(N5105) : up to 2.9GhzH3+(N6005) : up to 3.3Ghz

4MB L2 Cache

Intel UHD Graphics (24/32 EU up to 900MHz)

Memory2 x DDR4 1.2V SO-DIMM slots

Dual Channel, up to 2933 MT/s (DDR4-PC23400)

Max memory capacity 64GB

DDR3/DDR5 are not supported

Storage1 x eMMC connector (bootable and selectable on BIOS)

Various eMMC modules can be purchased at Hardkernel store

2 x SATA3 6Gbps

1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)

M.2 SATA SSD is not supported

Networking2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)

Realtek RTL8125B

Supports Wake-On-Lan

LED indicators (Green: Link, Amber: Traffic)

Video1 x DisplayPort 1.2 (up to 4K@60Hz)

1 x HDMI 2.0 (up to 4K@60Hz)

Dual simultaneous display support

Audio1 x Audio out (3.5mm jack)

1 x Audio in (3.5mm jack)

1 x SPDIF out (ALC1200, HDA codec)

* HDMI & DP have audio output too.

External I/O2 x USB 3.0 Host ports

2 x USB 2.0 Host ports

1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)

– 1 x DC 5V, 1 x DC 3.3V, 5 x GND


– 2 x I2C (SCL/SDA)

– 1 x External Power Button


– Three USB 2.0 ports

– All 3.3V I/O signal level

Other featuresPassive Heatsink

BIOS Backup Battery

– Maintains system time and BIOS settings

Power Button

Reset Button

System LEDS Indicators:

– Red (PWR) – Solid light when DC power is supplied

– Blue (left, SLEEP) – turns off only when the system enters into suspend mode

– Blue (right, PMIC) – turns on only when the major power rails are working

– Amber (SATA) – Flashes when SATA data transfers

– Green (NVMe) – Flashes when NVMe data transfers

Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)

– Active Cooling Fan is optional

– Connector (4-pin, 2.54mm pitch)

PowerDC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm

DC 14V ~ 20V (up to 60W)

– DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs

– DC 19V/7A power adapter is recommended if you two 3.5” HDDs together

Power consumption:

– IDLE : ≃1..9W

– CPU Stress : ≃15W

– CPU+GPU Stress : ≃18W

– Power-off : ≃0.25W

– Suspend : ≃0.6W

Form Factor110mm x 110mm x 47mm Approx.