ODROID H3+

4,462.00 4462.0 ZAR

3,880.00

Add to Cart
 


Deliveries:
South Africa: Price: R115, 2-4 working days.
International: Contact us for a quote.
Collections:
No Charge - 3 Appian Place, 373 Kent Ave, Randburg

All items subject to 1 month warranty. Extended 12 month warranty available at 20% of purchase price. t&c apply

oDroid H3+

oDroid H3+ Small Board Computer

A brand new x86 64-bit single board computer with large memory capacity and advanced IO ports has now been released, introducing the new oDroid H3+, the more powerful H3+ offers greater performance and is more powerful than its predecessor the H2+.

Description

  • Intel® Quad-Core Processor Jasper Lake N6005 has a base clock of 2GHz and a boost clock of 3.3GHz with 1.5MB L2 and 4MB L3 cache by a 10 nm process.

  • Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)

  • Two SO-DIMM slots, up to 32GB per slot

  • PCIe 3.0 x 4 lanes for one M.2 NVMe storage

  • 2 x 2.5Gbit Ethernet ports

  • 2 x SATA 3.0 ports

  • SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)

  • Intel UHD Graphics 32 EUs Turbo 900MHz

  • HDMI 2.0 and DP 1.2 multiple video outputs

  • A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode.

  • RTC / BIOS backup battery is included

Board Detail

  • CPU (Intel Celeron N5105)

  • 2 x DDR4 SO-DIMM slots (Dual channel memory support)

  • 1 x M.2 PCI Express Module Socket (NGFF-2280)

  • 1 x eMMC (Embedded Multimedia-Card) Socket

  • 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)

  • 2 x SATA3 6.0 Gb/s Data Connectors

  • 1 x DC Power Jack

  • 2 x USB 3.0

  • 2 x USB 2.0

  • 1 x HDMI 2.0

  • 1 x DisplayPort 1.2

  • 2 x RJ45 Ethernet Ports (10/100/1000/2500)

  • 5 x System LED Indicators

  • 1 x Peripheral Expansion Header (24-pin)

  • 1 x Power Switch

  • 1 x Reset Switch

  • 1 x Backup Battery Connector (2-pin)

  • 1 x Active Cooling Fan Connector (4-pin)

  • 1 x Audio out, 1 x Audio in, 1 x SPDIF out

You may also need:

The power consumption and heat dissipation on the oDroid C4 board is relatively low thanks to the modern 12mm fabricated S905X3 CPU.

Specifications:

Processor
Intel Celeron N6005 Processor (10nm, Quad-Core, TDP 10W)

H3+(N6005) : up to 3.3Ghz

4MB L2 Cache

Intel UHD Graphics (24/32 EU up to 900MHz)

Memory2 x DDR4 1.2V SO-DIMM slots

Dual Channel, up to 2933 MT/s (DDR4-PC23400)

Max memory capacity 64GB

DDR3/DDR5 are not supported

Storage1 x eMMC connector (bootable and selectable on BIOS)

Various eMMC modules can be purchased at Hardkernel store

2 x SATA3 6Gbps

1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)

M.2 SATA SSD is not supported

Networking2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)

Realtek RTL8125B

Supports Wake-On-Lan

LED indicators (Green: Link, Amber: Traffic)

Video1 x DisplayPort 1.2 (up to [email protected])

1 x HDMI 2.0 (up to [email protected])

Dual simultaneous display support

Audio1 x Audio out (3.5mm jack)

1 x Audio in (3.5mm jack)

1 x SPDIF out (ALC1200, HDA codec)

* HDMI & DP have audio output too.

External I/O2 x USB 3.0 Host ports

2 x USB 2.0 Host ports

1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)

– 1 x DC 5V, 1 x DC 3.3V, 5 x GND

– 1 x UART (TXD/RXD/RTS/CTS)

– 2 x I2C (SCL/SDA)

– 1 x External Power Button

– HDMI CEC, 5VA+

– Three USB 2.0 ports

– All 3.3V I/O signal level

Other featuresPassive Heatsink

BIOS Backup Battery

– Maintains system time and BIOS settings

Power Button

Reset Button

System LEDS Indicators:

– Red (PWR) – Solid light when DC power is supplied

– Blue (left, SLEEP) – turns off only when the system enters into suspend mode

– Blue (right, PMIC) – turns on only when the major power rails are working

– Amber (SATA) – Flashes when SATA data transfers

– Green (NVMe) – Flashes when NVMe data transfers

Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)

– Active Cooling Fan is optional

– Connector (4-pin, 2.54mm pitch)

PowerDC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm

DC 14V ~ 20V (up to 60W)

– DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs

– DC 19V/7A power adapter is recommended if you two 3.5” HDDs together

Power consumption:

– IDLE : ≃1..9W

– CPU Stress : ≃15W

– CPU+GPU Stress : ≃18W

– Power-off : ≃0.25W

– Suspend : ≃0.6W

Form Factor110mm x 110mm x 47mm Approx.