Penta SATA HAT for Rock Pi 4

1,419.82 1419.82 ZAR


Add to Cart

South Africa: Price: R115, 2-4 working days.
International: Contact us for a quote.
No Charge - 3 Appian Place, 373 Kent Ave, RandburgEffortlessly bridge legacy and modern technologies with our DB9 to USB Connector, enabling seamless connectivity between serial devices and USB ports.

All items subject to 1 month warranty. Extended 12 month warranty available at 20% of purchase price. t&c apply

                          Rock Pi 4 Penta SATA HAT

                          Expand your board capability with the SATA Hat

                          Construct your Network Attached Storage (NAS) utilizing Radxa's Rock Boards, accommodating as many as 5 HDDs/SSDs with a potential capacity of up to 100TB.

                          The Penta SATA HAT harnesses the M.2/PCIe interface on Radxa's ROCK Boards* to furnish a maximum of 5 SATA ports. It is essential to note that this HAT exclusively supports the Rock Pi 4 configuration when mounted on the designated heat sink.

                          The rationale behind adopting a configuration featuring 4 internal SATA ports and one eSATAp connection stems from its capacity to enhance flexibility in accommodating external disks within the setup.


                          Up to 5x HDD/SSD, 2.5inch and 3.5inch storage is supported, max storage 100TB
                          4x SATA
                          1x eSATA with power
                          utilizes two lanes of the PCIe 2.1 bus on Rock Pi 4
                          DC power input with support for both 2.5inch drives and ROCK Pi 4
                          External standard ATX power supply support for 3.5inch HDD
                          HDD suspend mode support
                          Software RAID 0/1/5 support
                          Optional PWM control fan for HDD heat management
                          Optional OLED display for IP / Store information
                          PLEASE NOTE:  You need to order the heat-sink with Rock 4, otherwise the Penta HAT can not be mounted on top. For use with Rock 3A please purchase the base plate for proper installation.

                          eSATApTo fully take advantage of the 5th SATA port, an eSATA connector was implemented which can be exported e.g. out of the case. The eSATA connector provides both data and power. It can directly drive a 3.5-inch HDD via a single cable.
                          The Penta SATA HAT is powered by the JMB585 with 2 lanes and 5Gbs PCIe buses with up to 10Gbps bandwidth. With 5 SSDs configured in Raid0 mode, a speed of up to 803MB/s can be achieved.

                          Product Content
                          Penta SATA HAT board
                          M.2 interface board with high-speed Ribbon connector cable
                          Penta SATA HAT works with the following boards:
                          Rock 4 Model A/A+, B/B+
                          Rock 3 Model A
                          Rock5 Model A - Please choose the right option
                          Optional: SATA HAT Top Board