Raspberry Pi Compute Module 3+ (CM3+) BCM2837B0 SoC
For industrial applications
This small integrated Module fits into a standard DDR2 SODIMM Connector, the flash memory is connected directly to the processor on the board but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi).
The CM3+ Compute Module contains the best parts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM) as well as an optional eMMC Flash device of 8GB, 16GB or 32GB (which is the equivalent of the SD card in the Pi).
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz
1GB LPDDR2 SDRAM
8GB/16GB/32GB eMMC Flash memory, or a Lite variant without eMMC Flash memory
To help you get started with the module there is an open-source breakout board, which is supplied with both a 32GB and Lite version of the CM3+ in an affordable development kit.
Caution! Stresses above those listed in Table 4 may cause permanent damage to the device. This is a stress rating only; functional operation of the device under these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
|VBAT||Core SMPS Supply||-0.5||6.0|
|3V3||3V3 Supply Voltage||-0.5||4.10|
|1V8||1V8 Supply Voltage||-0.5||2.10|
|GPIO0-27VDD||GPIO0-27 I/O Supply Voltage||-0.5||4.10|
|GPIO28-45VDD||GPIO28-45 I/O Supply Voltage||-0.5||4.10|
|SDXVDD||Primary SD/eMMC Supply Voltage||-0.5||4.10|
Specifications for Raspberry Pi Compute Module 3+ (CM3+) BCM2837B0 SoC
|Storage Size||16GB or 32GB|
16GB , 32GB