Radxa Rock Pi 4 Model C+ (4GB)
Powered by a Rockchip RK3399
Powered by the RK3399 with dual screen, and outstanding performance this board is perfect for your personal or business orientated project.
Specifications:
RK3399T 64bit hexa core processor
Dual Cortex-A72, frequency 1.5GHz (oc to 2GHz) with quad Cortex-A53, 1.4Ghz (os to 1.6GHz) with separate NEON coprocessor
GPU
Mali T860MP4 gpu, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11.
Memory LPDDR4
64bit dual channel [email protected]/s, 4GB
SPI Flash (optional)
32Mb SPI flash can be mounted - NVMe boot or e.g. Network boot via SPI supported*
*will reduce available DSI lanes by 2
Wifi/BT Antenna (for Wifi model)
Wifi/BT with external antenna support (uFL)
Storage eMMC module (optional)
Optional industrial level high performance eMMC module, 16G/32G/64G/128G available (click on module bottom side)
Micro SD card
SD card slot supports up to 128GB uSD card
M.2 SSD
M.2 (M) 2230 up to 2T M.2 NVME SSD via PCIe 2.0 x4 interface
Display HDMI
Micro HDMI 2.0 up to [email protected] (Type D), H.265/VP9 (HEVC) hardware decode
Micro HDMI 2.0 up to [email protected] (Type D), H.264 hardware decode
Peripherals
Display MIPI DSI
MIPI DSI 4 lanes display via FPC connector
Two of HDMI/HDMI2/MIPI DSI can work at the same time, support mirror or extend mode.
Camera MIPI CSI
MIPI CSI 2 lanes via FPC connector, support up to 8MP camera
Audio
Audio 3.5mm jack with mic with improved mechanics
HD codec that supports up to 24-bit/96kHz audio
Output can drive 32Ohm head phones directly
USB 3.0
USB 3.0 HOST x1
USB 3.0 OTG port x1 (upper one)
default - DEVICE, activate - HOST via serial command GPIO header
USB 2.0
2x USB HOST ports
Network
Wireless (wifi version only)
Wireless 802.11 b/g/n/ac
Bluetooth 5.0
LAN
GbE LAN (with PoE support via add on PoE HAT)
IO 40-pin expansion header :
- 1 x UART
- 2 x SPI bus
- 2 x I2C bus
- 1 x PCM/I2S
- 1 x SPDIF
- 1 x PWM
- 1 x ADC
- 6 x GPIO
- 2 x 5V DC power in
- 2 x 3.3V power pinOthers
Power button
Dual pin PWM fan header (controller chip onboard)
Power USB-C recommended 5V/5A
Size 85mm x 54mm
NOTE! Fits mechanically many of the existing Raspberry Pi 4 accessories
Specifications for ROCK PI 4 Model C+
Active Heat Management | Active Heat Management No or Active Heat Management Yes |
Active Heat Management |
Active Heat Management No , Active Heat Management Yes |