SS12F17G5 Mini Slide Switch, 3-Pin SPDT, 5mm Handle

https://cyberconnect.shop/shop/product/ss12f17g5-mini-slide-switch-3-pin-spdt-5mm-handle-2052

R 11.50 11.5 ZAR

R 10.00

Add to Cart



SS12F17G5 mini slide switch, 3-pin SPDT (ON-ON), 5mm handle, through-hole, sold per piece. Rated 50V DC, 0.5A for low-power on/off and mode switching.


Deliveries:
    South Africa: Price: R115, 2-4 working days.
    International: Contact us for a quote.
Collections:  No Charge

A tiny slide switch for low-power circuits. Slide the handle one way and the centre pin connects to one outer pin; slide it the other way and it connects to the other. Use it as an on/off switch by wiring only one outer pin, or as a two-way selector. Sold per piece.

Specifications

ModelSS12F17G5 vertical slide switch
FunctionSPDT (1P2T), ON-ON: slides between two positions
Pins3 pins, through-hole (PCB or breadboard-friendly with care, see note)
HandleG5 type, 5 mm handle height
Rating50 V DC, 0.5 A maximum (low-power switching)
Contact resistance30 mΩ max
Insulation resistance100 MΩ min at 500 V DC
Withstand voltage500 V AC for 1 minute
Mechanical lifeAbout 10,000 cycles
Sold asPer piece

Wiring

PinUse
Centre pinCommon: connect your power or signal input here
Outer pin AOutput when the handle is slid to side A
Outer pin BOutput when the handle is slid to side B

For a simple on/off switch, use the centre pin and one outer pin, and leave the other outer pin unconnected.

Typical uses

  • Power on/off switch on small battery projects (for example 3 V to 9 V battery holders)
  • Mode selection on Arduino, ESP32 and other microcontroller projects
  • Choosing between two inputs, two modes or two settings on a board
  • Hobby electronics, toys, badges and wearable circuits

Notes

  • This is a signal-level switch. Keep within 50 V DC and 0.5 A, and use a lower current for inductive loads such as motors and relays.
  • Not suitable for mains voltage.
  • The pin pitch is small and listings quote different figures (2 mm, 3 mm), so check a sample against your board before ordering PCBs. The pins can also be wired by soldering leads to them.

Specifications are taken from the Esswitch SS12F17G5 listing and other typical SS12F17G5 listings (iFuture Technology, Tempero Systems). They are not confirmed from this supplier's own listing.