TO-92 Transistor

https://cyberconnect.shop/shop/product/to-92-transistor-2061

R 11.50 11.5 ZAR

R 10.00

This combination does not exist.

Add to Cart



TO-92 through-hole transistors, sold per piece. Choose from NPN and PNP general-purpose types, high-voltage types (MPSA42, MPSA92, 2N5401, 2N5551, 13001) and a TL431 voltage reference. Used for switching, amplifying and repairs.


Deliveries:
    South Africa: Price: R115, 2-4 working days.
    International: Contact us for a quote.
Collections:  No Charge

General-purpose and high-voltage transistors in the TO-92 plastic package, plus a TL431 adjustable shunt reference. They fit breadboards and standard 0.1" PCB holes. Pick the part you need from the options; each is sold per piece. Check the pinout for your part before powering up, because TO-92 pin order is not the same on every type.

Specifications

PackageTO-92, through-hole, three leads
Sold asPer piece. Choose the part from the options.
Pinout conventionFlat face towards you, leads pointing down, pins 1 to 3 from left to right
Maximum power dissipationTypically 400 to 625 mW for the small-signal parts, up to about 750 mW for 13001 (varies by maker)

Part specifications

PartTypeMax VceMax IchFE (at Ic)Pinout
S9012PNP−20 V−500 mA64–202 (50 mA)E-B-C
S9013NPN20 V500 mA64–202 (50 mA)E-B-C
S9014NPN45 V100 mA60–1000E-B-C
S9015PNP−45 V−100 mA60–1000E-B-C
S9018NPN (RF)15 V50 mA28–198E-B-C
S8050NPN25 V500 mA85–300 (50 mA)E-B-C
S8550PNP−25 V−500 mA85–300 (50 mA)E-B-C
2N3904NPN40 V200 mA100–300 (10 mA)E-B-C
2N3906PNP−40 V−200 mA100–300 (10 mA)E-B-C
2N2222 / PN2222ANPN40 V1 A (PN2222A)100–300 (150 mA)E-B-C (PN2222A); some makers use C-B-E
BC327PNP−45 V−800 mA100–630 (100 mA), by gain group -16/-25/-40C-B-E
BC337-40NPN45 V800 mA250–630 (100 mA)C-B-E
MPSA42NPN (high voltage)300 V500 mA40 min (10 mA)E-B-C
MPSA92PNP (high voltage)−300 V−500 mA40 min (10 mA)E-B-C
2SA1015 (A1015)PNP−50 V−150 mA70–400 (2 mA)E-C-B
2SC1815 (C1815)NPN50 V150 mA70–700 (2 mA)E-C-B
C945NPN50 V150 mA70–700 (1 mA)E-C-B
A733PNP−50 V−100 mA90–600 (1 mA)E-C-B
2N5401PNP (high voltage)−150 V−600 mA60–240 (10 mA)E-B-C
2N5551NPN (high voltage)160 V600 mA80–250 (10 mA)E-B-C
13001NPN (high voltage)400 V200 mA (varies by maker)10–40 (20 mA)B-C-E (MJE13001); check marking
TL431Adjustable shunt voltage reference (not a transistor)36 V (cathode)1–100 mA (cathode)Vref 2.495 VVaries by maker, see note below

Typical uses

  • Switching LEDs, relays and small loads from Arduino, ESP32 and Raspberry Pi pins
  • Small-signal amplifiers, buffers and audio stages
  • NPN and PNP complementary pairs (S9013/S9012, S8050/S8550, 2N3904/2N3906, 2SC1815/2SA1015, C945/A733, MPSA42/MPSA92, 2N5551/2N5401)
  • High-voltage switching and level shifting (MPSA42, MPSA92, 2N5401, 2N5551, 13001)
  • Repairs and replacing common transistors in chargers, radios and power supplies
  • TL431: adjustable voltage reference and shunt regulator in switch-mode power supplies

Notes. Ratings are taken from manufacturer datasheets for each part and can differ slightly between makers, so treat them as typical. The pinout is the manufacturer datasheet pinout for that part. Clone parts occasionally differ, so confirm with a meter if the circuit matters. The PN2222A is E-B-C, but the P2N2222A from some makers is C-B-E. TL431 pinout depends on the maker: Texas Instruments shows pin 1 cathode, pin 2 anode, pin 3 reference; other makers show pin 1 reference, pin 2 anode, pin 3 cathode. Check the marking or datasheet for your batch. 13001 pinout and current rating differ between makers (MJE13001 is B-C-E, 200 mA).

Datasheet sources

onsemi SS9012, SS9013, SS9014, SS9015, SS9018, 2N3904, 2N3906, PN2222A, BC327, BC337-40, MPSA42, MPSA92, 2N5401, 2N5551; MCC S8050, S8550, 2SA1015, 2SA733, MJE13001; Toshiba and Unisonic 2SC1815; Tiger/Unisonic 2SC945; Texas Instruments TL431.

Value

S9012 , S9013 , S9014 , S8050 , S8550 , 2N3904 , 2N3906 , BC327 , BC337-40 , TL431 , MPSA42 , MPSA92 , 2SA1015 (A1015) , 2SC1815 (C1815) , 13001 , S9015 , S9018 , C945 , A733 , 2N2222 / PN2222A , 2N5401 , 2N5551