The ODROID HC4
Mini PC with a dual SATA drive dock which makes an affordable solution for a network attached storage (NAS) server.
This server centralizes data and enables users to share and stream multimedia files to phones, tablets and other devices on a network. Ideal for groups, and single users. A wide variety of software is available with simple configurations to tailor the ODROID-HC4 to your specification. The HC4 is built with two high performance SATA port and a Gigabit Ethernet port, to build a faster network storage device, and also supports RAID configurations. The HC4 is designed to hold 2x 2.5 inch HDD/SSDs or 3.5inch HDDs in any combination.
The HC4 is based on the very powerful Amlogic S905X3 chip, just like the ODROID-C4. It can run Samba, FTP, NFS, SSH, NGINX, Apache, SQL, Docker, WordPress and other server software smoothly with full Linux distributions like Ubuntu, Debian, Arch and OMV.
Note: The 15v/4A power supply is not included with this device and must be purchased separately.
You may also need:
Accessories:
Specifications:
| Form Factor | Board Dimensions: 84mm x 90.5mm x 25.0mm Heatsink Dimensions: 40mm x 32mm x 10mm Weight: 280g including heatsink, fan and case |
| Processor | Amlogic S905X3 Processor L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.800GHz) ARMv8-A architecture with Neon and Crypto extensions Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) |
| Memory | DDR4 4GiB with 32-bit bus width Data rate: 2640 MT/s (PC4-21333 grade) 1.2Volt low power design |
| Storage | 1x Micro SD slot (DS/HS mode up to UHS-I SDR104) |
| Networking | 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) – Realtek RTL8211F (Ethernet transceiver) – LED indicators * Green LED: Flashing by data traffics at 100Mbps connection * Amber LED: Flashing by data traffics at 1000Mbps connection |
| Video | 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) |
| Audio | 1 x HDMI digital output |
| Cooler | 1 x Passive heatsink ( 40x32x10 mm ) on the CPU of PCB board 1 x Hydraulic Bearing FAN – Rated Voltage : 5V – Rated Current : 100mA – Max Speed RPM : 4,000 – Air Flow CFM : 4.3 – Air Pressure (In H2O) : 0.053 – Noise Level(dBA) : 23.9 – Dimension : 40 x 40 x 10.6 mm – Wire & Connector : 80mm, 4 pin 1.25mm pitch |
| External I/O | 1 x USB 2.0 host port 1 x Debug serial console (UART) 2 x SATA Connectors |
| Other features | IR receiver for remote controller System LED Indicators: – Red (POWER) – Solid light when DC power is connected – Blue (ALIVE) – Flashing like heartbeat while Kernel is running. |
| Power | 1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm DC input : 14.5V ~ 15.5V – DC 15V/4A power adaptor is recommended. Sold separately. Power consumption with two ST2000DM006 HDDs : – IDLE(with HDD in spin-down) : ≃ 5.88W – Active(using SAMBA): ≃ 15.59W – Suspend: ≃ 0.29W |
Specifications for Odroid HC4
| OLED Panel | with Oled or without Oled |
|
OLED Panel |
with Oled , without Oled |