NTC 47D-15 Inrush Current Limiter Thermistor (47Ω, 3A, 15mm)
NTC 47D-15 inrush current limiter: 47 ohm cold resistance, 3A maximum steady current, 15mm disc. Fits in series with a power supply input to tame switch-on surge.
Deliveries:
South Africa: Price: R115, 2-4 working days.
International: Contact us for a quote.
Collections: No Charge
An NTC (negative temperature coefficient) power thermistor that sits in series with a mains or DC supply input. Cold, it has about 47Ω and limits the surge into reservoir capacitors; as it heats up its resistance drops to a fraction of an ohm, so losses stay low. Marked 47D-15 on the disc.
Specifications
| Type | NTC power thermistor, radial leads, disc |
|---|---|
| Resistance at 25 °C | 47 Ω (±15–25% typical; not stated) |
| Maximum steady current | 3 A |
| Disc diameter | 15 mm nominal (label "15"; actual diameter slightly larger) |
| Pack size | 1 piece per unit ordered (JH sells this in packs of 10; shop unit is single) |
| Maximum capacitance and voltage rating | Not stated by supplier, check the datasheet for your supply voltage |
Variant
Single option: 47Ω, 3A, 15mm.
Typical uses
- Inrush limiting in switch-mode and linear power supplies
- Protecting fuses and rectifiers when charging large reservoir capacitors
- Soft start for amplifiers, LED drivers and small motors
- Repairs where the original thermistor has failed
Warning: it runs hot in use (can exceed 100 °C). Mount it clear of other parts and let it cool for about a minute before a quick power cycle. For mains work, use only if you are competent and the circuit is isolated.