Small glass-bead NTC thermistors for measuring temperature: resistance falls as temperature rises. Read them with a fixed resistor in a voltage divider and an ADC input. Common on 3D-printer hot ends and heated beds, and in kettles, chargers and DIY thermostats.
Specifications
| Type | NTC thermistor, glass bead, two leads |
|---|---|
| 10K B3950 option | 10kΩ at 25 °C, B value 3950 (marked MF52/MF5A-3 103/3950 by the supplier), 5% tolerance per supplier listing |
| 100K option | 100kΩ at 25 °C (B value not stated by supplier; commonly 3950 for 3D printer parts) |
| Temperature range | Typically -40 to +125 °C for bead types (not stated) |
| Pack size | Sold per piece |
Available options
10K B3950 and 100K.
Typical uses
- Temperature sensing on Arduino, ESP32 and Raspberry Pi projects
- 3D-printer hot end and bed (100K usually; check your firmware)
- Fridge, kettle and heater repairs
- DIY thermostats
Use a pull-up resistor equal to the thermistor value at 25 °C for the best reading. 10K for a 10K sensor, 100K for a 100K sensor.
|
Value |
100K , 10K B3950 |